Tuesday 29 June 2021

The United Irishmen Uprising of 1798: A New Project

"Until... on Vinegar Hill... the final conclave.

Terraced thousands died, shaking scythes at cannon.

The hillside blushed, soaked in our broken wave.

They buried us without shroud or coffin

And in August... the barley grew up out of our grave."

- Séamus Heaney, "Requiem for the Croppies". 

Battle of Vinegar Hill, Enniscorthy, Wexford. 



There comes a time in many historical gamers' lives when they are drawn to the Napoleonic era. Since the very beginning of wargaming, the period has ranked among the most popular of subjects, and not without good reason. The Napoleonic Wars were a time of great personalities, ridiculously ostentatious uniforms and the clash of recognisably modern nations. They are a Europe-spanning tale of an almost legendary quality.

But I'm not going to do Napoleonics the usual way. I'm not going to drive the French out of Spain or try to take Moscow. I won't be painting big units of richly adorned troops. The subject I've chosen didn't even involve Napoleon that much. The 1798 Rebellion would perhaps be best described as a part of the French Revolutionary Wars instead. 

It recently struck me that I became interested in each of the historical armiess I've painted through personal or cultural connections to them. My Ulster Cycle army was the result of years spent reading Irish myth, and seeing it reflected in the land around me. My interest in Ethiopian history arose from family connections to the country. The Irish members of the International Brigades left for Spain from a port right next to where I live. 

I have many connections to the United Irishmen's Uprising. It is commonly seen as a defining aspect of the identity of Wexford, my home county. At school, I used to eat lunch on the site of an arms factory that supplied the rebels! My mother's workplace is at the foot of Vinegar Hill, the site of the United Irishmen's final defeat. You couldn't go anywhere in Wexford without passing a memorial of some kind to the rising.

The importance of the rebellion to Irish history is immense. It began the tradition of Irish republicanism and the belief in Ireland as a sovereign nation of united peoples. It is difficult to imagine an independent Ireland without the uprising, as despite its failure it laid the ideological groundwork for later Irish republican movements.

The Ireland of the 18th Century was home to a fiercely divided society. Since the Plantations of the Tudor era, the power of Gaelic Ireland had been destroyed, and the mostly Anglican planters had been installed in positions of power. These were known as the Protestant Ascendancy. The majority, who identified as Irish and who were overwhelmingly Catholic, were subject to harsh Penal Laws, which imposed great restrictions on political and civil rights as a means to deter rebellion. Presbyterians possessed more rights than Catholics, but were not granted equality with Anglicans.

The United Irishmen were founded as a parliamentary reform group in these circumstances. Theobald Wolfe Tone, a young Presbyterian lawyer, was among their founders. His stated aim was "To unite the whole people of Ireland, to abolish the memory of past dissensions, and to substitute the common name of Irishman, in place of the denominations of Protestant, Catholic and Dissenter". It was not long before the United Irishmen became a revolutionary movement, inspired by the French Revolution. The seeds of the "Tree of Liberty" had indeed fallen in Ireland.


Wolfe Tone, "Father of Irish Republicanism". 

For this project I am going to build two armies for Sharp Practice. I have tried a few TooFatLardies games in the past, and I really like their style. I think that the focus on individual leaders will work well for this period.

I'm going to use 28mm models from Trent Miniatures, who specialise in the French Revolutionary Wars period. They're nice, chunky miniatures in an old school style. They often come with multiple heads or weapons, despite being metal figures. This allows a bit more customisation. 

A beautiful sight


I've been painting some 3D printed 1/1200 scale ships to represent the "Expédition d'Irlande" launched by the French to aid the rebels. I had initially thought they would be a standalone project, but I might as well do the land troops as well. It might be fun to connect the two together in a campaign. I'll be showing them off in a future post! 

The Battle of Five Armies : A Hordes of the Things game

 26th June was my 20th birthday, and to celebrate my friends Tuan, Roachey and Wen Geng came over for a big Hordes of the Things game. We played a scenario based on the Battle of Five Armies from "The Hobbit". Tuan and I took command of the Goblin and Wargs while Roachey and Wen Geng led the Elves, Dwarves and Men. It was our first face to face wargame since the start of the coronavirus pandemic. 

The scenario allowed for the arrival of reinforcements for both sides after set numbers of Army Points were lost. These consisted of Thorin, Beorn, the eagles and some sneaky Goblins. 

Here are a few pictures from the battle. The Elves, Dwarves and Men are defending the high ground while the Goblins are approaching the town of Dale at the centre if the board. 

The game saw the Goblin-Warg alliance being victorious, with a score of 18 - 16. Unfortunately we didn't have time to play the game to its conclusion, but it was really enjoyable. I've never played a game this big before, and I hope to do so again! 

The starting deployment 

All 3 evil commands advance on the beleaguered Dale garrison
The trolls break down the gates and capture the town
My Warg command charges into the Dwarves' and Men's lines 


But are quickly repulsed! 


Unfortunately I don't have any more photos.
It was a fantastic game! 








Thursday 24 June 2021

Big Spanish Civil War Project Part 10

 This week I finished the last unit I need for the Jarama scenario, a Nationalist Heinkel He-51. It's a 1/72 scale kit from ICM. It was quite fiddly to put together and I'm not fully satisfied with my results, but I'm really happy just to have it done. The base is a 40mm round, which is too small for a model of this weight. It's quite unstable so I think I'll make another one. Like my Polikarpov, the Heinkel is based on a clear acrylic rod which has been magnetised. For this base I cut the top of the rod at an angle to allow the model to sit at a swooping pose.







Here are some group pictures of the whole collection! 


Republicans: Militia and International Brigades, with Soviet equipment 



Nationalists: Regular Army, Moroccans, Foreign Legion, German and Italian equipment. 


I've started making a batch of trees too. I'm using the wire twist method to make their armatures (TheTerrainTutor has a great video on the topic, as always). I used flower arranging wire from a florist's shop. It only cost €1 for enough to make 13 or 14 trees (!!). They are a mix of sizes, and will be used in the Jarama game.
One of the great things about making trees is that they can work for multiple scales. Some of these will also be used for a 28mm project that's coming very soon. Even small 15mm trees can be used as part of hedges in larger scales. 

The armatures


Bark was added using Milliput and a toothpick

This is a fairly time consuming method of making trees. Many people prefer to use Woodland Scenics premade armatures. However the wire method is hard to beat in terms of price and ability to customise.

Once the trees are done, the only terrain I'll need to make for the SCW game will be a set of roads. There are a few hills in the scenario but I think I'll use polystyrene shapes under the game mat for a more natural look.

Thanks for reading this post! I'm excited to be finishing the project and I'm really looking forward to moving on to the "Secret 28mm Project"! 

Monday 14 June 2021

Big Spanish Civil War Project Part 9 : The Last of the Infantry and Some Other Bits

 Lots of excitment this week as I've finished off all the infantry for the project, as well as a few extra bits. I started by painting the last militia squad, then moved on to the Nationalist individuals. 









                         Squad/Platoon 3
      The Nationalist staff. Messengers, officers and LMGs


The only miniature I still need for the scenario is a Nationalist aeroplane, which hasn't arrived yet. I wanted to keep making progress on the project, so moved on to some terrain. I painted a failed print of the Casa Blanca as a ruin.



It was painted with the same technique as the standard house. The roof is also made of random scraps, like coffee stirrers and cardboard. 

Still looking for things to do for the Spanish Civil War, I painted up a pair of Italian CV33 "tanks" . These absolutely woeful vehicles aren't necessary for the Jarama scenario, but I've always intended to grow this collection. The scenario is just a target to start off with. 










I'm almost ready to play the game itself. Apart from the Nationalist plane, I'll need to focus on making terrain. I've already started a tree or two, which are taking forever. I'm one of those gamers who find it really difficult to buy terrain, even if it's very hard to make! I really like the look of homemade terrain, though, as I can make it to my own specifications.

Until the next post, beir bua! 



Tuesday 8 June 2021

Big Spanish Civil War Project Part 8: Moroccan Regulares and the Casa Blanca

 This week I painted the Moroccans - the last full company needed for the project! They weren't as hard to paint as I had expected, but I ran into some interesting challenges when painting their skin. My approach to painting dark skin tones is usually to mix in white skin colours as highlights. The yellow and red pigments in these paints help to make the skin look more realistic and alive. I've found that GW's Reikland Fleshshade wash is really good for achieving this effect on a wide range of skin colours.


The whole group 

Rifle squads


The Command Base. 


I also painted a Spanish hacienda house, which will represent the Casa Blanca or "White House" which was defended by the XV Internationals at Jarama. It's another 3D print. I have another copy of this model which didn't print correctly, so I'm making it into a ruin. During the actual battle the house was bombed by a Republican plane, and the scenario I'm aiming for allows for this to happen. 




In case you haven't noticed, the roof of the house was cobbled together from bits of MDF and cardboard, as it didn't print correctly! It was a lot of fun to make. The model was painted with acrylics, and oils were used to add shading. 

I'm now working on the last squad of POUM Militia. They will be the final infantry for the project. After that I'll paint a Nationalist plane and some command staff, and that will conclude all the miniatures needed for the game. Terrain will be the next priority. 

It feels great to have gotten this far. I was doubtful if I could do everything in this project at the start, as I've never painted both sides of a conflict before, and normally only painting very small groups. I'm looking forward to finishing off the whole thing! 






Tuesday 1 June 2021

Big Spanish Civil War Project Part 7: The Legion, Republican Trucks and POUM

 I made a lot of progress on the project this week. I finished the Foreign Legion company and got some Republicans done too. The Legion were quite a challenge, and I ended up painting their uniforms a few times over before I was happy with them. It was fairly frustrating at times. I'm happy to have them done, as they'll be very useful in many different battles of the Civil War.

Squad 1. There is a broken stone cross on the officer's base. 

Squad 2. The barbed wire was made of guitar string wrapping spun in a drill. 

Squad 3

Foreign Legion Company Command. The flag was hand painted using my usual method 
Company Command for my company of standard Nationalist Infantry. 


I also finished two Soviet trucks this week. They are resin 3D prints, part of the payment I received for a commission. They'll be used to transport Republican ammunition in the Jarama scenario. 


I painted the second squad/ platoon of POUM militia next. I'm doing them in between other units to keep myself motivated, as I really enjoy painting "irregular" troops. I can paint them as individual characters, even in 15mm, and I don't need to worry about the accuracy of their uniforms! 

Standard rifle base

Command base
LMG base



I painted a Schneider CA1 tank to go along with the POUM. It's not part of the Jarama scenario, but I've wanted to paint one ever since I saw this picture :
Spain bought several CA1s from France after World War One, and they were used by the Army of Africa in the Rif War. A few were in Republican hands at the start of the Civil War. A pair of CA1s were used against the Alcazar at Toledo by the JSU (Socialist Youth). I'm not sure where the one on the picture was used. The graffiti seems to show that its crew came from several different ideologies, with the POUM (revolutionary Marxist) , CNT (anarchist) and UHP (trade union) represented. 






The tank was another resin print. I added a lot of extra details with Milliput, guitar string and high-quality homemade photoetch (aluminium cut from a Coke can I found by the road). These included a man hold cover which was welded to the front as additional armour. 




I weathered the tank with a fairly heavy oil dot filter to give it a grimy look. It was a really fun model to build and paint. 



Project Checklist as of this post:

Republicans 

Infantry
XV International Brigade 
POUM Militia (2 squads done, 1 to go)

Vehicles and Transports
T-26
Polikarpov I-15
2 donkeys
2 trucks

Nationalists 

Infantry 
Foreign Legion
Moroccan Regulares 
Nationalist Infantry (extra) 

Vehicles and Transports
2 Panzer Is
Captured T-26
Heinkel HE-51